• Mark_R40877_H_QR-EN
  • KSS_QR
  • Mark_R40877_H_QR-EN
  • KSS_QR

Fire Doors

Fire Doors in Pakistan

KSS fire doors in Karachi are designed to meet the life-safety requirements in various types of buildings and structures. They help compartmentalize spaces and contain the spread of fire. KSS fire resistant doors complement the existing passive fire-fighting system.

KSS Fire Doors Functions

KSS fire emergency exit doors serve five main functions.

  • Customize door frames and door sizes
  • Serve as a regular door at all times
  • Provide ready egress from a fire area during a
  • Inhibit spreading of fire
  • Protect life and property by reducing smoke
  • KSS fire proof doors also serve as a temperature rise door as its core integrity range is from 23 to 30 minutes.

KSS Certified Fire Doors Selection Guide

At KSS, we are equipped to offer fire rated door tested and certified to American and British Standards. The significant requirements of each of these standards are listed below.

  • A fire door must have a label attached indicating the fire test rating
  • Doors are rated for “/ time of the rating of the surrounding wall.
  • Every fire exit door must have a labeled self-latching (Panic bars] device to engage the strike. Dead bolts may not be used in place of latch bolts
  • A fire door must be self-closing
  • If a fire resistant doors is held open, it must be equipped with a listed / tested, heat responsive or electromagnetic device, fusible link or a smoke detection device which is to be closed in case of fire.
  • Only listed / tested fire door hard wares shall be used.
  • A fire door with glass  opening must be provided with  a listed / tested glass, a steel frame and glazing bead along with gaskit and spacer
  • Every assembly  configuration  such  as  transom panel, louver, vision 0 panel, frame material, thickness  of  metal, lead construction, core type, door set type (single, double or double egress], etc., Must be covered  by  the  test certificate  or global assessment  report  issued by the authentic testing agency.
  • Labeling is not obligatory but recommended.
  • According to BS, a fire door can be tested in unlatched condition with a self-closing device.
  • A fire door must be self-closing. Only the active door leaf of an access panel (service ducts) or cupboards, can however be installed without a closer but with a dead lock and a “Fire Door, Keep Shut” sign placed clearly on the door face.
  • Unless shown to be satisfactory when tested as part of a fire door assembly, the components of any hinge on which the door is hung should be fire rated.
  • If a fire door is held open, it must be equipped with a tested, automatic release mechanism actuated by an automatic fire detection and alarm system, fusible link (not if door is fitted in an opening provided as means of escape), or a door-closed delay device
  • Two Fire doors may be fitted in the same opening so that the total fire resistance is the sum of their individuals fire resistance.

KSS UL 10 C Steel Stiffened Doors Details

Steel Door in Pakistan

Specification:

  • Type : Single and double
  • Door Thickness : 45mm
  • Finish : Powder coating / Epoxy Coating
  • Astragal : On active leaf of double

Fire Ratings:

ANSI / UL1OC- Up to 12O minutes.

Sizes:

Approval Standard Infill Door Range Leaf Height (mm) X Leaf Width (mm) Fire Rating (Nin)
UL UL 10C Rock Wool Single Max 2400 X 1200 120
UL UL 10C Rock Wool Double Max 2400 X 2400 100

KSS UL 10 C Certificates

KSS International Product & Systems Certification UAE

KSS International Product and Systems Certification UAE

KSS The International Listing Registration Scope

Fire Door Labels

Fire Door Hardware

Request A Call Back Product Enquiry

Contact us for high-quality steel products and services, the UL 10C direct certification for KSS metal fire doors, which provide fire resistance for 60, 90, 120, and 180 minutes. Our Representative will get back to you soon.

In which Product you would be interested: